View TS1GRMMC4_4236243.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TS64M~1GRMMC4
Description
TS64MRMMC4 ~ TS1GRMMC4 is a 64MB ~ 1GB MMCmobile memory card. It's a fastest, low-power, highly integration memory card. TS64MRMMC4 ~ TS1GRMMC4 is designed to provide an inexpensive, mechanically robust storage medium in card form for multimedia consumer applications and mobile
MMCmobile Features
* * * * * * * Storage Capacity: 64MB ~ 1GB Support Dual Operating Voltage: 2.7~3.6V/1.65~1.95V Support clock frequencies: 0~52MHz Support different Bus width: x1, x4, x8 Operating Temperature: -25C ~ 85C Data access mode: Byte mode Fully compatible with MultiMediaCard system specification version 4.0 and backwards compatibility with previous specification * Form Factor: 18mm x 24mm x 1.4mm
devices (handheld PCs, digital cameras, MP3 players, etc.) to store, copy, and move data at high-speed transfer rate.
Placement
Front Pin Definition
Back
MMC Mode Pin No. 1 2 3 4 5 6 7 Name DAT3 CMD VSS1 VDD CLK VSS2 DAT0 Type I/O/PP I/O/PP/OD S S I S I/O/PP Description Data Command/Response Ground Power supply Clock Ground Data Name CS DI VSS VDD SCLK VSS2 DO
SPI Mode Type I I/PP S S I S O/PP Description Chip select Data in Ground Power supply Clock Ground Data out
8 9 10 11 12 13
DAT1 DAT2 DAT4 DAT5 DAT6 DAT7
I/O/PP I/O/PP I/O/PP I/O/PP I/O/PP I/O/PP
Data Data Data Data Data Data
Not used Not used Not used Not used Not used Not used
S: Power Supply; I:Input; O:Output; PP:Push-Pull; OD:Open-Drain; NC:Not Connected
Transcend Information Inc.
1
TS64M~1GRMMC4
MultiMediaCard Architecture
MMCmobile
Transcend Information Inc.
2
TS64M~1GRMMC4
Temperature Characteristics
Parameter
Operating temperature
MMCmobile
Min.
-25
Max.
85
Unit
Electrical Characteristics * Absolute Maximum Ratings
Parameter
Power Supply Voltage Input Voltage Input/Output Voltage
Symbol
VCC VIN VI/O
Rating
-0.6~+4.6 -0.6~+4.6 -0.6~+4.6
Unit
V V V
* Recommended Operation Conditions
Parameter
Power Supply Voltage (High Voltage Range) Power Supply Voltage (Low Voltage Range)
Symbol
VDDH VDDL
Min.
2.7 1.65
Typ.
3.3 1.8
Max.
3.6 1.95
Unit
V V
Transcend Information Inc.
3
TS64M~1GRMMC4
DC Characteristics * High Voltage Power Supply
MMCmobile
(Ta=-25 to 85,VDDH=2.7V to3.6V)
Parameter
Output Low Voltage (OD) Output High Voltage (PP) Output Low Voltage (PP) Input High Voltage Input Low Voltage Operating Current Stand-by Current Input Leakage Current Output Leakage Current Pin Capacitance Power Output Voltage
Symbol
VODOL VOH VOL VIH VIL ICC ISB ILI ILO CP VF
Min.
0.75* VDDH
Typ.
Max.
0.3
Unit
V V
Condition
IOL =2mA IOH =-100uA IOL =100uA
0.125* VDDH 0.625* VDDH -0.3 VDDH +0.3 0.25* VDDH 20(TBD) 400(TBD) -10/+10 -10/+10 7 1.50 1.8 1.95
V V V mA uA uA uA pF V
IVCCF =0mA VIN =0 to VDDH VOUT =0 to VDDH IF240mA
* Low Voltage Power Supply
(Ta=-25 to 85,VDDL=1.65V to 1.95V)
Parameter
Output High Voltage Output Low Voltage Input High Voltage Input Low Voltage Operating Current Stand-by Current Input Leakage Current Output Leakage Current Pin Capacitance
Symbol
VOH VOL VIH VIL ICC ISB ILI ILO CP
Min.
VDDL -0.2
Typ.
Max.
0.2
Unit
V V V V mA uA uA uA pF
Condition
IOH =-100uA IOL =100uA
0.7* VDDL -0.3
VDDL +0.3 0.3* VDDL 20(TBD) 400(TBD) -10/+10 -10/+10 7
IVCCF =0mA VIN =0 to VDDL VOUT =0 to VDDL
Transcend Information Inc.
4
TS64M~1GRMMC4
AC Characteristics * High Speed Card Interface Timing
MMCmobile
(Ta=-25 to 85,VDDH=2.7V to3.6V)
Parameter
Clock Frequency (Data Transfer Mode) Clock Frequency (Identification Mode) Clock Low Time Clock Rise Time Clock Fall Time Input Set-up Time Input Hold Time Output Delay Time Signal Rise Time Signal Fall Time
Symbol
fpp fOD tWL tTLH tTHL tISU tIH tDLY trise tfall
Min.
26 0 6.5
Max.
52 400
Unit
MHz KHz ns
Notes
3 3 3 3 5 14 3 3
ns ns ns ns ns ns ns CL30pF CL30pF CL30pF
Transcend Information Inc.
5
TS64M~1GRMMC4
* Backwards Compatible Card Interface Timing
MMCmobile
(Ta=-25 to 85,VDDH=2.7V to3.6V)
Parameter
Clock Frequency (Data Transfer Mode) Clock Frequency (Identification Mode) Clock Low Time Clock Rise Time Clock Fall Time Input Set-up Time Input Hold Time Output Delay Time
Symbol
fpp fOD tWL tTLH tTHL tISU tIH tDLY
Min.
0 0 10
Max.
20 400
Unit
MHz KHz ns
Notes
10 10 3 3 9.7 35
ns ns ns ns ns CL30pF
Transcend Information Inc.
6
TS64M~1GRMMC4
* Command Latch Cycle Parameter CLE Setup Time CLE Hold Time CE Setup Time CE Hold Time ALE Setup Time ALE Hold Time WE Pulse Width Data Setup Time Data Hold Time Symbol Min. 30 tCLS1 tCLH1 tCS1 tCH1 tALS1 tALH1 tWP1 tDS1 tDH1 15 40 90 90 75 45 90 30 Unit ns ns ns ns ns ns ns ns ns Notes
MMCmobile
CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF
* Address Latch Cycle Transcend Information Inc.
7
TS64M~1GRMMC4
Parameter CLE Setup Time CE Setup Time ALE Setup Time ALE Hold Time Write Cycle Time WE Pulse Width WE High Hold Time Data Setup Time Data Hold Time Symbol tCLS2 tCS2 tALS2 tALH2 tWC2 tWP2 tWH2 tDS2 tDH2 Min. 90 195 30 15 150 45 105 90 30 Unit ns ns ns ns ns ns ns ns ns Remark CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF
MMCmobile
* Input Data Latch Cycle Transcend Information Inc.
8
TS64M~1GRMMC4
Parameter CLE Hold Time CE Hold Time ALE Setup Time Write Cycle Time WE Pulse Width WE High Hold Time Data Setup Time Data Hold Time Symbol tCLH3 tCH3 tALS3 tWC3 tWP3 tWH3 tDS3 tDH3 Min. 285 195 90 60 45 15 30 30 Unit ns ns ns ns ns ns ns ns Remark CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF
MMCmobile
Transcend Information Inc.
9
TS64M~1GRMMC4
* Serial Access Cycle after Read Parameter CE Access Time Read Cycle Time RE Pulse Width RE High Hold Time Data Setup Time Data Hold Time Ready to RE Low Symbol tCEA4 tRC4 tRP4 tREH4 tDS4 tDH4 tRR4 Min. 285 60 45 15 5(TBD) 5(TBD) 285 Unit ns ns ns ns ns ns ns
MMCmobile
Remark CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF CL<=80pF
Transcend Information Inc.
10
TS64M~1GRMMC4
Reliability and Durability
Temperature Moisture and corrosion Operation: -25C / 85C Operation: 25C / 95% rel. humidity Stress: 40C / 93% rel. hum./500h Salt Water Spray: 3% NaCl/35C; 24h acc. MIL STD Method 1009
MMCmobile
ESD protection
Contact Pads: +/-4kV, Human body model according to ANSI EOS/ESD-S5.1-1998 Non Contact Pads area: +/-8kV(coupling plane discharge) +/-15kV(air discharge) Human body model according to IEC61000-4-2 10.000 mating cycles; test procedure: t.b.d. t.b.d. t.b.d. 1.5m free fall UV: 200nm, 15Ws/cm according to ISO 7816-1 No warp page; no mold skin; complete form; no cavities surface smoothness sigma -0.1 mm/cm within contour; no cracks; no pollution (fat, oil dust, etc.)
Durability Bending Torque Drop test UV light exposure Visual inspection Shape and form
Above technical information is based on MMC4.0 standard specification and tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes in specifications at any time without prior notice.
Transcend Information Inc.
11

▲Up To Search▲

Price & Availability of TS1GRMMC4

	To Download TS1GRMMC4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .